Got Lots Done Today

Got Lots Done Today
Applied some strips to the undersides of the hatches to allow for either a brass or stainless steel hook hook to be inserted. I'll have the hatches held down with bungee cords attached to the inside of the hatches in order to keep the top smooth and clean.

After a few hours, the added strips where adhered enough to go ahead and apply a full coat of epoxy to the exposed pieces of raw wood. Remember all wood needs to completely sealed by epoxy to prevent water from penetrating the wood which is not good! This brings me to the next post which was also accomplished today and that was the end pours. check out the next post for more details.